Archive for category Misc

It is NOT about Guns – it is about (financial) Greed (and Incompetence)!

My blogging tends to be technical but as a small business owner this was something I just could not let pass without saying something:

Colt Defense – a company that goes back to the “old west” – has filed for Chapter 11 protection.

Direct quote: “.. Colt’s current problems lie in its reliance upon government contracts for sustenance; ignoring the consumer market until it was too late; and being owned by private equity interests with a knack more for financial engineering than gunsmithing. ..”

How many businesses out there are “.. owned by private equity interests..” and doing well.. and actually growing? My gut tells me there are a lot mote “Colt’s” out there than we want to admit.

This is yet another example where the folks pulling the strings do “not have a clue”.

 

NOTE: Quote was from: a post on Fool.com

Advertisements

, , ,

Leave a comment

The Sky is Falling ! … The Sky is Falling!- Really???

The sky is NOT falling – all that happened was Swiftpage sold Saleslogix to Infor – one of the LARGEST Private digital products companies in the world ($3billion/year).

 

Short story – (TRUE) – A customer of mine told me they had received a call from a former Saleslogix bp (who does Salesforce) and (in so many words) told him the sky was falling and suggest they should consider switching to SF from Saleslogix. Well.. my customer DID NOT SWALLOW THAT STUPID LINE!

A friendly message/warning to ALL Saleslogix customers – The “Vultures are circling”. This ALWAYS happens when a company is bought/sold. It’s a big “marketing ploy” – DON”T FALL FOR IT! If you have questions, then call your BP asap.. or call the team at Saleslogix in AZ.

A few points:

A – Yes.. Saleslogix’ CRM will become Infor CRMTM

A – Existing Saleslogix BP’s will become Infor (crm) BPs

B – Infor (ERP) BP’s are not going to be selling/servicing Infor CRMTM – NOTE: remember the big mess Sage caused by allowing the ERP/Accounting BP’s to get into the Saleslogix crm business.. total failure!

C – An immediate DOUBLING of the R&D budget to speed up the (Saleslogix) Road Map implementation

D – The Windows/LAN fat client is still part of the product

E – SData is and will remain the integration (access) point for Saleslogix

F – The R&D budget is being DOUBLED asap to speed up the road-map installation

G – The sale will be finalized in a couple of weeks (probably Sept 1st because it starts a new quarter).

H – The Nov Customer & Partner Conference will still happen in Scottsdale. IMHO the “Swifties” will probably not be there and the Infor team will be.

 

, , , , ,

Leave a comment

“Work Smarter – Not Harder”.. Really??? – How Stupid!

The internet is full of garbage postings about how we should “… work smarter – not harder..”

Here’s the REAL Secret: Smart people are HARD Workers!

Mike Rowe (host of “Dirty Jobs”) has a great blog/post that debunks the “Work Smarter – Not Harder” myth.

The definition of work is:

Work equals Force times distance time the cosine of “theta”  – where theta is the angle between the force and displacement vector(s). SO when theta is zero degrees the Force and displacement are in the same direction and you get the biggest bang for your effort! The more Force (the “harder” you work) you put into it the more you get out of it. Force is the Agent Of Change.

For you “DIY” folks out there.. here’s a great example of why Work Smarter – Not Harder falls apart:
Scenario:
House full of squeaky (door) hinges. How do you fix them?
Plan A: Oil them – Not Hard – but NOT Smart! You end up with mess and a quiet hinge for a very short time.
Plan B: “WD-40” (Remember it stands for “Water Displacement formula number 40 😉 – It’s not “oil” – but it’s messy and does not last long either! Another  Not Hard – but NOT Smart!

Plan C: Use Vaseline – Definitely Smart and Hard! You have to:
1 – remove each hinge pin (one at a time) – can be hard but a small hammer, a pin punch and a flat blade screwdriver really help)
2 – clean the pin (maybe use “409” to really get it clean)
3 – wipe the pin with Vaseline ad put a “dob” on the hole on the top of the hinge where the pin goes
4 – put the pin back and tap it down (hard/flush)
5 – Repeat steps 1 thru 4 for the remaining 2 (or 3) hinges on that door
6 – clean up any mess (paper towels and 409 helps here
7 – repeat steps 1 thru 6 for each door in your home
This will take you some time to do (the “hard”/Force in the Work equation). However, when you are done you have nice quiet door hinges and it lasts for a quite a while. (Good) Work has a satisfaction factor to it that you do not see in the basic (physics) formula. There is something about doing something and doing it right which makes us feel really good (and ready for a nice cool beer – or two 😉

So if we are just trying to be “Smart” and not putting any FORCE into our Work.. we are just going nowhere 😉

Leave a comment

FireFox 23 will be a Game Changer w/https sites

There’s an option in FF (version 18.0 and up) called:
security.mixed_content.block_active_content

When FF 23 is released (20.0 is the current release) this option will be enabled by default. What this means is ANY “mixed” https page will NOT load non https content.

So if you have constructed a site that has any http links in it and your site is on SSL (https) then users will experience “failures”.

QUES: Is this a good thing?

ANS: YES! Attacks using “bad links” are buried in https sites everywhere. You typically see a popup asking if you want to display the “non-https” content. When you do you take a BIG risk of infecting your system, getting hacked, etc. KUDOS to the FF team for taking this step to block non-https data by default!

I would strongly suggest you test this out NOW to make sure things will work right when FF 23 is released. Using FF 18.0 and up you simply need to:
A – key in about:config in the url/address line
B – search for the key: security.mixed_content.block_active_content
C – change the value to true

 

FYI – Chrome has already made such a change (you get a warning)..

 

, , , ,

Leave a comment

IE 10 installs automatically on Windows Updates

If you have Automatic Update turned on:
” Users of Windows 7 Service Pack 1 (SP1), and 64-bit version of Windows Server 2008 R2 SP1 will receive Internet Explorer 10 as an important update if they have Automatic Updates enabled, or if they perform a manual scan for updates on Windows Update.”

NOTE: installations which use “WSUS” – Windows Server Update Services” and control the updates to their installations can easily block this. For individual PC’s NOT being managed by WSUS (most of us 😉 there is a “blocker kit“.

Here is the direct download: IE10-BLOCKER

, , , ,

Leave a comment

Sage Selling ACT & SalesLogix to Swiftpage

Well.. many of us saw this coming when Sage first announced ACT & SalesLogix NOT being part of it’s “core business”.

Here are some links to the official announcement:
globalcomms.sage.com
www.investors.sage

Plus another from Sharecast – Thanks “Nato”!:
www.sharecast.com

.. and of course, Swiftpage.. GREAT People!

, , , , , , , ,

Leave a comment

Finally – One Place for all things Web Development?

Sounds too good to be true, doesn’t it? Only time will tell.

On Monday, October 8, 2012 there was an announcement by W3C on the alpha release of Web Platform Docs.  The purpose of this is to establish a single point/place where we all can go for “All Things Web Development”.

Her’s a blog posting by Jean Paoli (President – Microsoft Open Technologies) on the announcement:

http://blogs.msdn.com/b/interoperability/archive/2012/10/08/w3c-s-web-platform-docs-your-go-to-for-all-things-web-development.aspx

 

Bear in mind this site is only a few days old but it has names like Adobe, Facebook, Google, HP, Microsoft, Mozilla, Nokia, Opera that are stewards of the project. If they pull this off it will save all of us TONS of time (translate $$$) in development/research as related to web efforts.

Let us wish them the best and contribute to the effort for the common good! So jump over and take a look NOW!

, , , , , , ,

Leave a comment